Machine for Road Marking

 Picture

 Name

Induction

Technical Parameters

 Hand-push hot-melt marking machine

  The hand-push hot-melt marking machine is one of the main equipment in the hot-melt marking construction, which is widely used in the marking of road markings of various levels of highways, urban roads, residential areas, and parking lots. The product has simple structure, flexible operation and labor-saving construction, especially for zebra crossing. It is obviously superior to similar products. It is equipped with a secondary benchmark to cope with the rapid switching of the baseline of various complex roads and special-shaped markings

1. Whole machine weight:110KG
2. Dimensions:1250*800*940MM
3. Adiabatic Paint Tank: The most capacity is 100kg.
4. Glass beads Capacity:20KG
5. Rotate Handle with mixer: Thermoplastic Paint is heated evenly.
6. Bead spreading system: roller glass bead spreader
7. Floor knife: floating cemented carbide floor knife
8. Burner: Keep thermoplastic paint temperature
9. Paint outlet: let thermoplastic paint flow into die shoe
10. Marking thickness:1.2-2.5mm
11. Marking width:150/200mm
12. Optional marking bucket:50/100/300/400/450mm
13. Indicative Rod: Aligned waterline
14. Bracket: Die shoe is fixed on the bracket
15. Frame: Put the Gas Tank in
16. Tube：Connect with Gas Tank
17. Glass beads Box: Put Glass beads in it
18. Gear: Front wheel drive shaft of glass beads dispenser rotation
19. Rear wheel holder: Make machine go straight or turn around

 Hydraulic Thermoplastic Preheater

Hydraulic thermoplastic preheater is mainly used for melting thermoplastic road marking paint and is one of the main equipment in hot melt marking construction. It has many features such as stainless steel shell, boiler plate round pot bottom, direct-injection burning stove, agitating cage stirring blade, positive and negative stirring, and fast melting speed; the insulation layer is filled with high-quality thermal insulation cotton, which has a good thermal insulation effect and longer insulation time; The hydraulic system uses a high-torque hydraulic motor and an overload relief multi-way valve to maximize protection of the hydraulic system.

1, Whole machine weight: 1020 KG
2, Dimensions: 1800×1700×1580 MM
3, Material tank capacity: 1200 KG
4,Engine Power: 15 HP (Electric Start)
5,Working Pressure: 4-5 MPA
6,Rotating Speed: 20-100 R/MIN
7,Hydraulic tank capacity: 70 L
8, Melt temperature: 180℃ ± 20℃
9,Heating method: Liquefied gas
10,Mixing system: High-power hydraulic stirring system and specially designed overload relief device, preventing fatal damage to the system due to any wrong operations.
11,Control System:  Multi-channel integrated hydraulic control valve, forward and reverse stirring, and stepless speed change
12, Heating system: Direct injection combustion stove